User Manual Q&AAnswer
Jan 10, 2025 - 12:41 AM
To connect your laptop to the BenQ SP890 1080P Conference Full HD Projector, you can follow these steps:
1. Check the available ports on your laptop and the projector. The BenQ SP890 offers various input ports, including HDMI, VGA, DVI-D, and Component Video.
2. Determine which port on the projector matches the output port on your laptop. For example, if your laptop has an HDMI output, you can use an HDMI cable to connect it to the HDMI input port on the projector.
3. Once you have identified the appropriate cable, connect one end to the corresponding port on your laptop and the other end to the corresponding input port on the projector.
4. Turn on your laptop and the projector. Make sure the projector is set to the correct input source by pressing the "Source" button on the projector or using the remote control to select the desired input source.
5. On your laptop, go to the display settings and select the appropriate display mode. You may need to extend or duplicate your laptop's screen to the projector.
6. Adjust the projector's focus and keystone settings if necessary to ensure a clear and properly aligned image.
For more detailed instructions and illustrations, please refer to the user manual of the BenQ SP890 1080P Conference Full HD Projector. You can find the manual at the following link: [BenQ SP890 User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment