User Manual Q&AAnswer
Jan 09, 2025 - 11:25 PM
To calibrate the SSLACEX ABS 34cm Metal Electronic Scales, follow these steps:
1. Power on the scale and allow it to warm up for about 30 seconds.
2. Enter the calibration mode sequence as instructed on the scale's display.
3. Follow the instructions provided on the display to complete the calibration process.
4. Once the calibration process is finished, remove the calibration weight (if required) and the scale will return to normal weighing modes.
Please note that the specific calibration process may vary slightly depending on the model and firmware of your SSLACEX scale. It is always recommended to refer to the user manual for detailed instructions on calibration specific to your model.
(Reference: SSLACEX ABS 34cm Metal Electronic Scales Healthy Human Body User Manual)
Add New Comment