User Manual Q&AAnswers
Jan 09, 2025 - 11:16 PM
To use the iBasso DX80 as a USB DAC for your computer, follow these steps:
1. Power on the DX80.
2. Go to Settings > USB Settings.
3. Select the "DAC" option.
4. Connect the DX80 to your computer using the provided USB cable.
5. On your computer, select the iBasso DX80 as the audio output device. This can usually be done through the sound settings or audio preferences.
6. Play music on your computer, and the sound will be output through the DX80.
Please note that for Windows PC, you may need to download and install the iBasso USB Audio Driver from the iBasso website before using the USB DAC function. Mac computers and Linux computers do not require any additional drivers.
For more detailed instructions and troubleshooting, please refer to the user guide provided with the DX80.
Jan 09, 2025 - 11:17 PM
To connect the iBasso DX80 to your computer for charging and data transfer, you will need to use the Micro USB cable included in the package. Simply connect one end of the cable to the Micro USB port on the DX80 and the other end to a USB port on your computer. This will allow you to charge the DX80 and transfer files between the device and your computer.
For charging, make sure the DX80 is powered off and connect it to the computer. The DX80 can be charged by a computer with a USB port or any USB charger with a 5V output voltage and 1A or above output current. A full charge takes about 3 hours with a 5V 2A USB AC adapter or 8 hours with a computer's USB port.
For data transfer, make sure the DX80 is powered on and connected to the computer. The DX80 will be recognized as a removable storage device, and you can access its files and folders on your computer. You can transfer music files, playlists, and other data between the DX80 and your computer using this connection.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment