User Manual Q&AAnswer
Jan 09, 2025 - 10:43 PM
To connect your ViewSonic LS625W Short Throw Projector to your computer, follow these steps:
1. Make sure your computer is turned off.
2. Locate the HDMI or VGA port on your computer.
3. Connect one end of the HDMI or VGA cable to the corresponding port on your computer.
4. Locate the HDMI or VGA input port on the back of the projector.
5. Connect the other end of the HDMI or VGA cable to the input port on the projector.
6. Turn on your computer and the projector.
7. Press the "Input" button on the projector or the remote control to select the HDMI or VGA input source.
8. Adjust the projector's focus and zoom if necessary.
For more detailed instructions and illustrations, please refer to the ViewSonic LS625W Short Throw Projector User Guide, specifically the "Connecting to a Computer" section. You can find the user guide at the link provided.
Add New Comment