User Manual Q&AAnswer
Jan 09, 2025 - 10:14 PM
To connect the ZANCHIE ZEH003 headphones to your TV, please follow these step-by-step instructions:
1. Plug in the charging dock and place the headphones in to charge before beginning setup.
2. Check the available connection options on your TV (audio output, usually marked "OUT").
3. Select the corresponding connection cable based on the available options:
a. Option A: Digital Optical
- Access the sound menu of your TV and change the "audio settings".
- Look for "Sound Settings" within the TV menu settings.
- Select "Digital Optical OUT" within the sound settings.
- Find the digital optical jack on the back of your TV and plug one end of the provided optical cable into it.
- Plug the other end of the optical cable into the optical input on the back of the transmitter base.
b. Option B: 3.5mm AUX / Headphone Jack
- Access the sound menu of your TV and change the "audio settings".
- Within the TV menu settings, select "External Speaker" or "Audio Out".
- Find the 3.5mm AUX / Headphone Jack on the back of your TV and plug one end of the AUX cable into it.
- Plug the other end of the AUX cable into the AUX port on the back of the transmitter.
c. Option C: RCA Audio OUT
- Follow the same steps as Option 2 - Step 1.
- Find the RCA AUDIO OUT jacks on the back of your TV (circular red and white jacks).
- Connect the included RCA adapter cable to the Audio Out jacks on your TV.
- Connect the included AUX cable to the adapter and plug the other end into the Audio In jack on the back of the transmitter.
d. Option D: Coaxial Audio Out (Cable Not Included)
- Find the coaxial audio output jack on your TV or cable box.
- Use a coaxial cable (needs to be purchased separately) to connect your TV or cable box with the transmitter.
4. Once the transmitter is connected to your TV, make sure it is set up and powered on.
5. Press the power button on the headphones for 3 seconds to turn them on. The headphones should automatically pair with the transmitter.
6. Adjust the volume using the +/- button on the right headphone. If the transmitter is only connected via the AUX cable, adjust the volume through your TV remote.
If you have followed these steps and still cannot hear any audio through the headphones, please check the troubleshooting section in the user guide or contact ZANCHIE support for further assistance.
Add New Comment