User Manual Q&AAnswer
Jan 09, 2025 - 09:42 PM
To connect your Bose SA-5 Amplifier to your speakers, please follow these steps:
1. Before connecting your speakers, make sure the amplifier is unplugged from an AC (mains) power source.
2. Remove terminal block A from the SPEAKERS OUT connector on the amplifier.
3. Connect the speaker wires to terminal block A as follows:
- Insert the left speaker's marked wire into the + L positive terminal and the plain wire into the L - negative terminal.
- Insert the right speaker's marked wire into the + R positive terminal and the plain wire into the R - negative terminal.
4. Using a small, flat-head screwdriver, tighten the screws on the terminals clockwise to secure the wires.
5. Reinsert the terminal block connector into the SPEAKERS OUT connector.
6. Follow the operating instructions for your unpowered speakers to connect the other end of the speaker wires to the speakers.
Note: It is important to use unpowered speakers with the Bose SA-5 Amplifier. Do not connect any make or model of powered speakers, as it may cause damage to the equipment.
By following these steps, you should be able to successfully connect your Bose SA-5 Amplifier to your speakers and enjoy high-quality sound. For more detailed information, please refer to the user guide provided with the product.
Add New Comment