User Manual Q&AAnswer
Jan 09, 2025 - 09:20 PM
To connect the Pioneer Elite BDP-80FD Blu-Ray Disc Player to your TV, follow these steps:
1. Ensure that both the Blu-Ray player and your TV are turned off.
2. Locate the HDMI output port on the back of the Blu-Ray player. It is labeled as "HDMI OUT."
3. Connect one end of an HDMI cable to the HDMI output port on the Blu-Ray player.
4. Locate an available HDMI input port on your TV. These ports are usually labeled as "HDMI IN" or have corresponding numbers.
5. Connect the other end of the HDMI cable to the HDMI input port on your TV.
6. Turn on your TV and set it to the appropriate HDMI input source. This can usually be done by pressing the "Input" or "Source" button on your TV remote and selecting the corresponding HDMI input.
7. Turn on the Pioneer Elite BDP-80FD Blu-Ray Disc Player.
8. On your TV, you should now see the Pioneer logo or the Blu-Ray player's home screen.
Note: If your TV does not have an HDMI input, you can use alternative connection methods such as component video (red, green, blue) or composite video (yellow) cables. However, HDMI is recommended for the best video and audio quality.
For more detailed information and illustrations, please refer to the "Connecting Your Player" section in the Pioneer Elite BDP-80FD 3D-Compatible Streaming Blu-Ray Disc Player User Manual, which can be accessed [here](https://manuals.plus/wp-content/uploa...).
Add New Comment