User Manual Q&AAnswer
Jan 09, 2025 - 08:52 PM
To clean the kettle, follow these steps:
1. Unplug the kettle and allow it to cool down completely.
2. Wipe the exterior of the kettle with a soft, slightly moist cloth.
3. Do not immerse the electrical parts of the kettle in water or other liquids.
4. To clean the filter, carefully push down on the filter from the inside towards the center and remove it.
5. Rinse the filter with clear water to remove any lime deposits or impurities.
6. Refit the filter by pushing it back into the opening until it clicks into place.
7. If the kettle requires descaling, fill it to the MAX mark with a 5-15% vinegar solution.
8. Switch on the kettle and let the solution reach boiling temperature.
9. Wait for approximately 15 minutes for the limescale to dissolve.
10. Pour the solution into the drain and rinse the kettle thoroughly with clear water.
11. Dry the kettle after cleaning and before using it again.
Please refer to the "CLEANING AND MAINTENANCE" section in the user guide for more detailed instructions and safety precautions.
Add New Comment