How do I connect my device to the Optoma EH200ST Lumen DLP Short Throw Projector? (Optoma EH200ST DLP Throw Projector User Manual)

Answer

manuals.plus

Jan 09, 2025 - 04:44 AM


To connect your device to the Optoma EH200ST Lumen DLP Short Throw Projector, follow these steps:

1. Check the available ports on the projector. The EH200ST has various input ports, including HDMI, VGA, composite video, and audio.

2. Determine the type of connection your device supports. Most modern devices, such as laptops, smartphones, and tablets, have HDMI output ports. If your device doesn't have an HDMI port, you may need an adapter or cable to connect it to the projector.

3. Prepare the necessary cables or adapters. For HDMI connections, a standard HDMI cable should suffice. If you're using a device with a different output port, such as VGA or composite video, you'll need the corresponding cable or adapter.

4. Connect one end of the cable to the appropriate port on your device. For HDMI connections, plug the HDMI cable into the HDMI output port of your device.

5. Connect the other end of the cable to the corresponding input port on the projector. For HDMI connections, plug the HDMI cable into the HDMI input port on the projector.

6. Power on the projector and your device.

7. Use the projector's input selection feature to choose the correct input source. Press the "Source" or "Input" button on the projector's remote control or control panel to cycle through the available input options until you see the image from your device.

8. Adjust the projector's focus and other settings as needed to optimize the image quality.

For more detailed instructions and illustrations, please refer to the Optoma EH200ST Lumen DLP Short Throw Projector User Manual, specifically the "Connecting a Video Source" section.