User Manual Q&AAnswer
Jan 09, 2025 - 04:04 AM
To connect the Klipsch R-25C Center Channel Speaker to your amplifier, follow these steps:
1. Use a 16-12 gauge speaker wire.
2. Connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier's LEFT channel.
3. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your amplifier's LEFT channel.
4. Repeat the above steps for connecting all remaining speakers to the appropriate amplifier channels.
5. Make sure that no bare wires from any of the connections touch any other terminals to avoid short circuits.
6. Some Klipsch Reference speakers come with dual binding posts connected by a metal strip. Do not remove this strip as it is necessary for correct speaker function.
7. If your speaker has two sets of binding posts, it is possible to "Bi-wire" the speaker. Refer to your receiver's manual for further instructions.
Please note that it is important to check your amplifier's manual or consult with your dealer to ensure that your particular amplifier is best suited for your application.
Add New Comment