User Manual Q&AAnswer
Jan 09, 2025 - 03:42 AM
To calibrate the INEVIFIT I-KS001W Digital Kitchen Scale, follow these steps:
1. Choose a weight: Find a known weight, such as a calibration weight or a household item with a known weight, like a bag of sugar or a can of beans.
2. Place the scale on a flat surface: Ensure that the scale is placed on a stable and level surface.
3. Turn on the scale: Press the power button to turn on the scale.
4. Start the calibration process: Once the scale is turned on, place the chosen weight on the scale's platform. Wait for the scale to determine the weight.
5. Check the weight reading: Look at the weight displayed on the scale. If the weight is accurate and matches the known weight, no further calibration is needed. If the weight is off, proceed to the next step.
6. Press the calibration button: The scale should have a calibration button or a specific button combination for calibration. Refer to the manual or look for a button labeled "Calibrate" or "Cal" on the scale. Press and hold this button until the scale recalibrates.
7. Wait for recalibration: After pressing the calibration button, wait for the scale to recalibrate. This process may take a few seconds.
8. Verify accuracy: Once the recalibration is complete, place the chosen weight on the scale again and check if the displayed weight matches the known weight. Repeat the calibration process if necessary.
It's important to note that the specific calibration process may vary slightly depending on the model and firmware version of the scale. If you encounter any difficulties or have further questions, refer to the instruction guide provided with the scale or contact INEVIFIT customer support for assistance.
Add New Comment