User Manual Q&AAnswer
Jan 09, 2025 - 02:57 AM
To connect your device to the Pericat S20 Theater Projector with WiFi and Bluetooth, please follow these steps:
1. Plug the power cord into an outlet and turn on the projector by pressing the Power Button.
2. Open the lens cover and adjust the kickstand to the desired angle.
3. On the projector or the remote, press the "s" button to enter the Input Source interface.
4. Select the correct input source for your device. If you want to screen mirror, choose Screen Mirroring.
5. If you selected Screen Mirroring, press OK to enter the WiFi Selection interface.
6. If you want to connect via wireless connection, select your router's WiFi and enter the correct password. Make sure your device is connected to the same WiFi network.
7. If you want to connect via wired connection, connect your device to the USB port of the projector using the original cable.
8. Once the connection is established, the content from your device will be mirrored on the projector screen.
Note: The steps may vary slightly depending on your device's operating system (iOS, Android, or Windows 10). Please refer to the user manual for specific instructions for your device.
If you encounter any issues or need further assistance, please refer to the Pericat S20 Theater Projector with WiFi and Bluetooth user manual or contact Pericat support at www.pericatstore.com or support@pericatstore.com.
Add New Comment