User Manual Q&AAnswer
Jan 09, 2025 - 02:15 AM
To connect your Epson VS260 Multimedia Projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. If your computer has a VGA port, use a VGA cable to connect the computer to the projector. If your computer has an HDMI port, use an HDMI cable instead.
4. Plug one end of the cable into the VGA or HDMI port on your computer and the other end into the corresponding port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system.
7. Adjust the projector settings if necessary, such as the input source or resolution, using the projector's remote control or control panel.
For more detailed instructions and troubleshooting tips, please refer to the Epson VS260 Multimedia Projector User's Guide provided in the link above (page 9-11).
Add New Comment