User Manual Q&AAnswer
Jan 09, 2025 - 01:00 AM
To set the clock on the Sylvania SKCR2706BT 10.2 Under-Counter Bluetooth, follow these steps:
1. Make sure the unit is in standby mode (turned off).
2. Press and hold the CLK SET / MEM / REPEAT button on the front panel or remote control. The hour time digits will start blinking on the LCD display.
3. Use the SKIP / TUNE buttons to adjust the current hour. Press and hold the buttons for fast adjustment.
4. Press the CLK SET / MEM / REPEAT button again to confirm the hour setting. The minute time digits will start blinking.
5. Use the SKIP / TUNE buttons to adjust the current minute. Press and hold the buttons for fast adjustment.
6. Press the CLK SET / MEM / REPEAT button again to confirm the minute setting.
7. The clock is now set. The unit will display the current time on the LCD display.
Note: The clock uses a 12-hour format. The PM icon will light up when the hour is set in the PM.
If you need further assistance, please refer to the user manual for more detailed instructions.
Add New Comment