How do I connect the Velodyne Wi-Q 10 12-Inch Wireless Subwoofer to my audio receiver? (Velodyne Wi-Q 10 12-Inch Wireless Subwoofer User Manual)

Answer

manuals.plus

Jan 09, 2025 - 12:59 AM


To connect the Velodyne Wi-Q 10 12-Inch Wireless Subwoofer to your audio receiver, follow these steps:

1. Set up the WiConnect System Transmitter:
   - Connect one end of an RCA-to-RCA (male-male) cable to the LFE input on the transmitter.
   - Connect the other end of the cable to the LFE or SUB output on your audio receiver.
   - Plug the power adapter into the back of the transmitter and connect the other end to a power outlet.
   - Make sure the CHANNEL setting on the transmitter matches the CHANNEL setting on the back of the subwoofer.

2. Place and connect the subwoofer:
   - Find an optimal location for the subwoofer in your room (refer to the user manual for placement guidelines).
   - Connect the female end of the power cable to the back of the subwoofer and the male end to a power outlet.
   - Press the POWER button on the back of the subwoofer to turn it on.

3. Set up the audio receiver options:
   - Refer to your audio receiver's instruction manual to access the speaker menu.
   - Select that you have a subwoofer and choose the number of speakers.
   - Set the speaker size as small and adjust the LFE/SUB output level to 0 dB.

4. Run the automatic equalizer:
   - Remove the grille from the front of the subwoofer.
   - Insert the supplied microphone into the supplied mic stand and plug it into the Mic jack on the front of the subwoofer.
   - Place the mic in your preferred listening position.
   - Press the EQ button on the remote control for about 2-3 seconds to start the automatic equalizer process.
   - The subwoofer will emit sweep tones and adjust the graphic EQ filters for the flattest response at the mic position.

5. Set the phase:
   - While listening to music, press each of the four PHASE buttons on the remote control.
   - Listen for the smoothest transition between the subwoofer and the satellite speakers and select the PHASE button that provides the best result.

By following these steps, you should be able to successfully connect the Velodyne Wi-Q 10 12-Inch Wireless Subwoofer to your audio receiver. For more detailed instructions and information, refer to the user manual provided with the product.