User Manual Q&AAnswer
Jan 08, 2025 - 11:11 PM
To connect your smartphone or tablet to the DR. Q HI-04 projector, you will need to use an additional cable that is not included in the box. You can use an HDMI cable, USB cable, or a wireless connection option if available on your device. Here are the steps to connect your device:
1. HDMI Connection:
- Connect one end of the HDMI cable to the HDMI port on your smartphone or tablet.
- Connect the other end of the HDMI cable to the HDMI input port on the projector.
- Set the projector's input source to HDMI.
- Your device's screen should now be mirrored on the projector screen.
2. USB Connection:
- Some smartphones and tablets support USB connectivity to projectors. Check if your device has this feature.
- Connect one end of the USB cable to the USB port on your device.
- Connect the other end of the USB cable to the USB port on the projector.
- Set the projector's input source to USB.
- Your device's screen should now be mirrored on the projector screen.
3. Wireless Connection:
- If your smartphone or tablet supports wireless screen mirroring (e.g., Miracast, AirPlay, Chromecast), you can connect it wirelessly to the projector.
- Enable wireless screen mirroring on your device.
- On the projector, select the corresponding wireless input source (e.g., Miracast, AirPlay).
- Follow the on-screen instructions on your device to connect to the projector wirelessly.
- Your device's screen should now be mirrored on the projector screen.
Please note that the specific steps may vary depending on your device's operating system and settings. Refer to your device's user manual or contact the manufacturer for detailed instructions on connecting your specific device to a projector.
Add New Comment