User Manual Q&AAnswer
Jan 08, 2025 - 11:00 PM
Molding Decibullz NRR 31 Custom Molded Earplugs to fit your ears is a simple process. Here are the step-by-step instructions:
1. Heat the Decibullz thermoplastic molds: Start by boiling a pot of water. Once the water is boiling, remove it from the heat source. Place the Decibullz thermoplastic molds into the hot water and let them sit for 5-7 minutes to soften.
2. Allow the molds to cool: After the molds have softened, carefully remove them from the hot water using tongs or a spoon. Allow them to cool for a few seconds until they are comfortable to touch.
3. Mold the earplugs to the shape of your ears: Once the molds have cooled slightly, place them into your ears. Make sure the tip of the mold is facing the ear canal. Press firmly on the back plug of the mold, ensuring that the tip is still facing the ear canal. Hold this position for a few minutes to allow the molds to set.
4. Check the fit: After the molds have set, gently remove the earplugs from your ears and check the fit. They should fit snugly and comfortably in your ears, providing a tight seal.
5. Adjust if necessary: If the fit is not ideal, you can reheat the molds and repeat the molding process until you achieve the perfect fit. Decibullz earplugs can be remolded multiple times, allowing you to customize the fit to your preference.
Remember to follow the instructions provided in the manual for the best results. If you have any further questions or concerns, refer to the Decibullz NRR 31 Custom Molded Earplugs Instruction Manual for more detailed information.
Add New Comment