User Manual Q&AAnswer
Jan 08, 2025 - 10:34 PM
To use the CosySun Unit Muscle Stimulator, follow these steps:
1. Connect the electrode pads to the lead wire(s).
2. Attach the pads to the treatment area, ensuring that your skin is free from dirt, oil, or lotion.
3. Plug the lead wires into the ports on the device.
4. Turn on the unit.
5. Press the center button to choose the AB channel.
6. Press the "M" button to select one of the six main modes and different sub-modes.
7. Press the "+/-" buttons to increase or decrease the intensity of the stimulation.
8. Press the "T" button to select a timer duration of 10 to 60 minutes.
9. To pause or continue the stimulation, press and hold the center button for 3 seconds.
10. When you're done, turn off the unit and remove the electrodes.
For more detailed instructions and information, please refer to the user manual provided with the product.
Note: It's important to start with a single 15-minute treatment session and repeat if necessary, but not exceeding three times per day. It's also recommended to rate your discomfort before and after each therapy session to assess the level of pain relief achieved.
Add New Comment