Answer
Jan 08, 2025 - 09:57 PM
To set the clock on the Magnavox MM442 3-Piece Top Loading CD Shelf System, please follow these steps:
1. Make sure the unit is in standby mode (press the STANDBY button to turn off the system).
2. Press and hold the CLOCK button for about 2 seconds until the hour digits start flashing on the display.
3. Use the TUNING UP/DOWN buttons to adjust the hour. Press and hold the buttons to quickly change the hour.
4. Press the CLOCK button again to switch to the minute digits. The minute digits will start flashing.
5. Use the TUNING UP/DOWN buttons to adjust the minute. Press and hold the buttons to quickly change the minute.
6. Press the CLOCK button once more to confirm and exit the clock setting mode.
Note: The clock uses a 24-hour format. When setting the hour, the display will show "PM" for hours 13 to 23.
For more detailed instructions and illustrations, please refer to page 15 of the owner's manual provided for the Magnavox MM442 3-Piece Top Loading CD Shelf System.
Add New Comment