User Manual Q&AAnswer
Jan 08, 2025 - 09:34 PM
To change the unit of measurement on the ZCSM 1 Electronic Weight Scale, follow these steps:
1. Locate the [UNIT] or [MODE] key on the scale. This key is used to switch between different units of measurement.
2. Press the [UNIT] or [MODE] key to cycle through the available units until you find the desired weighing mode. The scale supports both pounds and kilograms, so you should be able to switch between these two units.
3. Once you have selected the desired unit of measurement, the scale will display weight readings in that unit.
Note: If you want to convert pounds to kilograms or vice versa, the scale also provides a conversion feature. To convert pounds to kilograms, maintain pressure on the Zero control and press and hold the Weigh control while keeping the Zero control depressed for another five seconds. Releasing both controls will cause a beep to sound, and the current unit setting (either lb. or kg) will be highlighted on the display when it is in setup mode.
Please refer to the ZCSM 1 Electronic Weight Scale's operational guide for more detailed instructions and illustrations.
Add New Comment