Answer
Jan 08, 2025 - 08:56 PM
To set the alarm on the ROCAM CR1008 alarm clock, follow these steps:
1. Make sure the slide switch button towards the left is set to "ON" to activate the alarm.
2. Press the "SET ALARM" button. The alarm indicator (I ALM) will light up, and the display will show "06:00" flashing.
3. Press the "HOUR" button to set the desired hour for the alarm.
4. Press the "MIN" button to set the desired minute for the alarm.
5. Press the "SET ALARM" button to save the alarm time, or wait for another 5 seconds for it to be confirmed automatically.
6. Use the slide switch button to adjust the alarm volume to your preference.
Note: The alarm will ring at the set time every day unless manually turned off.
For more detailed instructions and information, please refer to the instruction guide provided with the ROCAM CR1008 alarm clock.
Add New Comment