User Manual Q&AAnswer
Jan 08, 2025 - 08:51 PM
To connect your Sonos AMPG1US1 The Versatile Amplifier to your existing audio system, follow these steps:
1. Ensure that your existing audio system is compatible with the Sonos AMPG1US1. The amplifier is designed to work with speakers that have an impedance rating of 8 ohms or higher.
2. Connect the Sonos AMPG1US1 to your existing audio system using the provided speaker wire. The amplifier has two speaker outputs labeled "Left" and "Right." Connect the positive (+) terminal of the left speaker to the "Left+" terminal on the amplifier and the negative (-) terminal of the left speaker to the "Left-" terminal on the amplifier. Repeat the same process for the right speaker, connecting it to the "Right+" and "Right-" terminals.
3. If your existing audio system has a subwoofer, you can connect it to the Sonos AMPG1US1 using the provided subwoofer output. Connect one end of a subwoofer cable to the subwoofer output on the amplifier and the other end to the input on your subwoofer.
4. Connect your audio source to the Sonos AMPG1US1. The amplifier has multiple input options, including an RCA line-in, a 3.5mm audio jack, and an HDMI ARC input. Choose the input that is compatible with your audio source and connect it to the corresponding input on the amplifier.
5. Power on the Sonos AMPG1US1 and your existing audio system. Ensure that the volume levels on both the amplifier and your audio source are set to an appropriate level.
6. Use the Sonos app on your smartphone or tablet to control and configure the Sonos AMPG1US1. The app will guide you through the setup process and allow you to adjust various settings, such as volume, EQ, and room calibration.
For more detailed instructions and troubleshooting tips, refer to the Sonos AMPG1US1 The Versatile Amplifier User Guide provided in the link above.
Add New Comment