User Manual Q&AAnswer
Jan 08, 2025 - 08:49 PM
To connect the aune Flamingo Tube DAC to your speakers, follow these steps:
1. Make sure the Flamingo Tube DAC is powered off and unplugged.
2. Locate the line out ports on the back of the Flamingo Tube DAC. These are typically labeled as "Line Out" or "Output."
3. Connect one end of an audio cable (such as RCA or 3.5mm) to the line out ports of the Flamingo Tube DAC.
4. Locate the input ports on your speakers. These can vary depending on the type of speakers you have. Common input ports include RCA, 3.5mm, or speaker wire terminals.
5. Connect the other end of the audio cable to the input ports of your speakers. Make sure to match the left and right channels correctly.
6. Once the connections are secure, power on the Flamingo Tube DAC and your speakers.
7. Adjust the volume on the Flamingo Tube DAC to your desired level.
Please refer to the instruction manual for more detailed information on connecting the aune Flamingo Tube DAC to your specific speakers.
Add New Comment