User Manual Q&AAnswer
Jan 08, 2025 - 10:47 AM
To light the pilot on the Mr. Heater MHVFRD20LPT 18000 BTU Vent Free Radiant Propane Heater, follow these steps:
1. Turn off all electric power to the appliance and make sure the equipment shutoff valve is fully open.
2. Push in the gas control xxxx and slightly turn it clockwise to the OFF position.
3. Wait for five minutes to clear out any gas. Smell for gas, including near the floor. If you smell gas, stop and follow the safety instructions provided in the user guide.
4. Push in and turn the control xxxx counterclockwise to PILOT. Press and hold the control xxxx in for five seconds.
5. With the control xxxx pressed in, push down and release the ignition button. This will light the pilot. If needed, keep pressing the ignitor button until the pilot lights.
6. Continue holding the control xxxx pressed in for 30 seconds after the pilot is lit. After 30 seconds, release the control xxxx .
7. If the pilot does not stay lit, refer to the troubleshooting section in the user guide and contact a qualified service person or gas supplier for repairs.
8. When the pilot is lit, turn the control xxxx counterclockwise to the desired heating level. The main burner should light.
Please note that these instructions are a summary and it is important to refer to the user guide for complete and accurate information.
Add New Comment