User Manual Q&AAnswer
Jan 08, 2025 - 10:31 AM
To connect your AAXA LED Pico Micro Video Projector to your computer, follow these steps:
1. Connect one end of the HDMI cable to the HDMI port on your LED Pico projector.
2. Connect the other end of the HDMI cable to the HDMI port on your computer.
3. On your computer, go to the main menu and enable HDMI output. The process may vary depending on your computer's operating system. For Windows XP, you can press the function key (usually labeled "Fn") and the "F5" key together to enable multiple displays. You can also try pressing the Windows key and the "P" key to toggle through display settings.
4. Right-click on your computer desktop and select "Properties" from the menu.
5. In the display Properties window, click on the "Settings" tab.
6. If a secondary monitor is grayed out, click on it and check the box that says "Extend my Windows Desktop onto this monitor."
7. Adjust the screen resolution if needed. The recommended resolution for the LED Pico projector is 1280x800.
8. Once the connection is established and the settings are adjusted, your computer's display should be mirrored or extended onto the LED Pico projector.
Please note that these instructions are based on general guidelines and may vary depending on your specific computer and operating system. It's always a good idea to consult your computer's owner's manual for detailed instructions on enabling HDMI output.
Add New Comment