User Manual Q&AAnswer
Jan 08, 2025 - 09:55 AM
To connect your smartphone to the VILINICE BL43 WiFi Bluetooth Projector, you have two options: wired screen mirroring connection and wireless screen mirroring connection. Here are the steps for each option:
Wired Screen Mirroring Connection:
1. Press the signal source key "S" on the projector or the remote control and select "Miracast" to enter the interface.
2. Plug an original USB charging cable into the USB port of the projector.
3. When prompted on your iPhone, select "Trust this device" and enter your iPhone password to connect.
Wireless Screen Mirroring Connection:
1. Press the signal source key "S" on the projector or the remote control and select "Miracast". (Refer to the first step of the wired connection for picture guidelines)
2. Open the Wi-Fi settings on your phone and search for the projector hotspot named "Dual cast-***". Enter the password to connect. (The hotspot name is displayed on the screen as "SSID: Dual cast-***", and the password is "PSK: *****". If your phone gets disconnected from the projector Wi-Fi, reconnect to the projector hotspot.)
3. Slide up the control center on your phone (full-screen phones slide down from above, phones with a home button slide up from below) and open "Screen Mirroring". Search for and select the projector device (the name is "Dual cast-***") to connect.
Please note that the specific steps may vary slightly depending on your smartphone model and operating system version. For more detailed instructions, you can refer to the user manual that comes with the VILINICE BL43 WiFi Bluetooth Projector.
If you encounter any issues during the connection process, it is recommended to contact the manufacturer's customer support for further assistance.
Add New Comment