User Manual Q&AAnswer
Jan 08, 2025 - 09:36 AM
To connect your Jimveo E30 projector to Wi-Fi, please follow these steps:
1. Turn on the projector and go to the settings menu.
2. Navigate to the "Network" or "Wi-Fi" section.
3. Select the Wi-Fi network you want to connect to from the list of available networks.
4. Enter the password for the Wi-Fi network, if prompted.
5. Wait for the projector to connect to the Wi-Fi network. This may take a few moments.
6. Once connected, you should see a confirmation message on the screen.
Please note that the exact steps may vary slightly depending on the specific model and firmware version of your Jimveo E30 projector. For detailed instructions, please refer to the user manual that came with your projector.
Add New Comment