User Manual Q&AAnswer
Jan 08, 2025 - 09:13 AM
To connect the Pure Resonance MC2.5B Surround Sound Mini Cube Speaker to your audio system, follow these steps:
1. Turn off your receiver or amplifier and unplug it from the power outlet.
2. Use 2-conductor 16-gauge speaker wire. Remove about 2 inches of the outside jacket from both ends of the wire, then strip approximately 1/2 inch of the insulation from each conductor at the speaker end.
3. Connect the red wire to the red terminal and the black wire to the black terminal at the speakers and the receiver/amplifier. Make sure there are no loose strands of wire touching each other across the speaker or amplifier terminals.
4. Repeat these steps for connection of all speakers to the system.
5. The MC2.5B mini cube speaker may be connected in two ways depending on the receiver/amplifier used with the system:
a. If your amplifier has a subwoofer output connection, use a shielded audio cable with a Y-Adaptor to connect the audio cable to the left and right "LINE INPUT" on the subwoofer.
b. Alternatively, you can route the front left and right speaker cables from the amplifier through the subwoofer to the speakers. Connect the wires from the amplifier to the "HIGH LEVEL INPUT" and the cables going to the speakers to the "HIGH LEVEL OUTPUT" on the subwoofer.
6. Once the connections are made, plug your receiver/amplifier in, turn it on, and enjoy your new music system.
Please refer to the "INSTALLATION & OPERATION GUIDE" section of the Pure Resonance MC2.5B Surround Sound Mini Cube Speaker User Manual for more detailed instructions and diagrams.
Add New Comment