User Manual Q&AAnswer
Jan 08, 2025 - 07:31 AM
To connect your Christie DWX600-G WXGA 1DLP Projector to a computer, follow these steps:
1. Make sure your computer and projector are powered off.
2. Locate the computer's video output port (e.g., HDMI, VGA, DVI).
3. Connect one end of the appropriate video cable (e.g., HDMI cable, VGA cable) to the computer's video output port.
4. Locate the corresponding video input port on the projector (e.g., HDMI input, VGA input).
5. Connect the other end of the video cable to the projector's video input port.
6. Power on your computer and projector.
7. On your computer, go to the display settings and select the appropriate display mode (e.g., duplicate, extend).
8. Adjust the projector's focus and zoom settings, if necessary, to achieve the desired image size and clarity.
For more detailed instructions and illustrations, please refer to the "Connecting to a Computer" section in the Christie DWX600-G WXGA 1DLP Projector User Manual, which can be accessed using the link provided.
Add New Comment