User Manual Q&AAnswer
Jan 08, 2025 - 05:49 AM
To connect the speakers to the Magnavox MM440 3-Piece CD Stereo Radio, follow these steps:
1. Locate the speaker wires that came with the unit. These wires should be connected to the back of the main unit.
2. Identify the speaker clips on the rear of the main unit. There should be two sets of clips labeled "Speaker R" and "Speaker L" for the right and left speakers respectively.
3. Take the speaker wire labeled for the right speaker and connect it to the "Speaker R" clips on the main unit. Make sure to match the positive (+) and negative (-) terminals on the wire with the corresponding terminals on the clips.
4. Repeat the same process for the left speaker. Connect the speaker wire labeled for the left speaker to the "Speaker L" clips on the main unit, matching the positive (+) and negative (-) terminals.
5. Once both speakers are connected, ensure that the wires are securely attached to the clips.
6. Position the speakers in the desired location, ensuring they are placed at an appropriate distance from the main unit for optimal sound quality.
7. Power on the unit and test the speakers by playing music or a radio station. Adjust the volume as needed.
Note: It's important to follow the instructions provided in the user guide and ensure that the speakers are connected correctly to avoid any damage to the unit or speakers.
Add New Comment