User Manual Q&AAnswer
Jan 08, 2025 - 04:46 AM
To set the date, time, and measurement unit on the Easy@Home Digital Blood Pressure Monitor, please follow these steps:
1. Make sure the monitor is turned off.
2. Press and hold the "SET" button for 3 seconds to enter the mode for setting the year.
3. Use the "MEM" button to change the year. Each press will increase the numeral by one in a cycling manner.
4. Once you have set the correct year, press the "SET" button to confirm and move to the month setting.
5. Repeat steps 3 and 4 to set the month and day.
6. Repeat steps 3 and 4 to set the hour and minute.
7. After setting the date and time, the LCD display will show "dOnE" and then turn off.
8. To set the measurement unit, repeat steps 3 and 4 to select the desired unit (e.g., mmHg or kPa).
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment