User Manual Q&AAnswer
Jan 08, 2025 - 04:44 AM
To connect the Donner DP-500 turntable to a Bluetooth speaker, follow these steps:
1. Set the pre-amplifier selector switch (OUTPUT SELECT switch) on the back panel of the turntable to the "LINE" position.
2. Make sure your Bluetooth speaker is in pairing mode. Refer to the user manual of your Bluetooth speaker for instructions on how to enable pairing mode.
3. Briefly press the Bluetooth On/Off button on the back panel of the turntable. The turntable will automatically connect to the last paired Bluetooth device.
4. If you want to connect to a different Bluetooth speaker or the turntable doesn't automatically connect, long press the Bluetooth On/Off button on the back panel of the turntable. This will disconnect the previously connected device and initiate a new search for Bluetooth devices.
5. Follow the pairing instructions provided by your Bluetooth speaker. This may involve selecting the Donner DP-500 turntable from the list of available devices on your Bluetooth speaker.
6. Once the pairing is successful, you can start playing vinyl records on the turntable, and the audio will be wirelessly transmitted to your Bluetooth speaker.
Note: The Donner DP-500 turntable uses Bluetooth version 5.0 and has an effective range of up to 10 meters (approximately 33 feet). Keep in mind that the compatibility of the turntable with Bluetooth speakers may vary depending on the specific models and brands of the devices involved.
Add New Comment