User Manual Q&AAnswer
Jan 08, 2025 - 04:41 AM
To connect the Qisebin E7-PRO Active Noise Cancelling Headphones to your mobile device via Bluetooth, please follow these steps:
1. Slide the power button on the headphones from OFF to BT (Bluetooth) mode. You will hear a voice prompt saying "Battery High/Low - Pairing" and the LED light on the right earcup will start blinking blue.
2. Enable Bluetooth on your mobile device. This can usually be done by going to the Settings menu and finding the Bluetooth option.
3. Your mobile device will enter Bluetooth discovery mode and search for available devices. Look for "COWIN E7" in the list of available devices.
4. Select "COWIN E7" on your mobile device to initiate the pairing process.
5. Once the pairing is successful, you will hear a voice prompt saying "Connected" and the LED light on the right earcup will turn solid blue.
Your Qisebin E7-PRO Active Noise Cancelling Headphones are now successfully connected to your mobile device via Bluetooth. You can now enjoy wireless audio playback and control functions using the headphone controls as described in the user manual.
If you encounter any issues with the Bluetooth connection, it is recommended to disconnect and reconnect the headphones, ensure that the devices are within range (30 ft. or 9 m), and make sure that both the headphones and the mobile device are powered on. If the problem persists, you can contact COWIN customer service for further assistance using the provided contact information in the user manual.
Add New Comment