User Manual Q&AAnswer
Jan 08, 2025 - 04:13 AM
To install the Pyle PDIC60T in-wall/in-ceiling speakers, follow these steps:
1. Cut a hole in the drywall according to the provided cut-out dimensions: 14"(w) x 6.4"(H) x 3"(D).
2. Connect the speaker wires to the speakers.
3. Place the frame assembly in the wall and xxxx down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.
4. Put in the strips of adhesive to secure the grille.
5. Before installing the speaker grille, gently press on the outer edge of the tweeter mount to adjust the position of the tweeter. The tweeter will not swivel more than 15 degrees in any direction.
6. Replace the metal grille.
7. After installing the speaker grille, gently press on the mesh of the tweeter to adjust the position of the tweeter.
For more detailed instructions and illustrations, please refer to the included instruction manual for the Pyle PDIC60T in-wall/in-ceiling speakers.
Add New Comment