User Manual Q&AAnswer
Jan 08, 2025 - 04:12 AM
To connect the Pyle PHSP101T PA Horn Speaker to your amplifier, you will need to follow these steps:
1. Identify the wires: The speaker includes four wires - red, black, white, and green. The colored wires are the hot leads, and the black wire is the common wire.
2. Determine the power tap: Each color wire corresponds to a different power tap - 5, 15, or 20 watts. The red wire is typically used for the 20-watt power tap, but it's always a good idea to consult the manual or manufacturer for confirmation.
3. Connect the wires: Connect one of the wires (hot lead) to the positive or hot terminal of your amplifier and connect the black wire (common) to the negative or ground terminal of the amplifier.
4. Ensure proper polarity: When connecting multiple speakers, it is important to pay attention to the polarity to prevent poor sound quality or low sound pressure. For parallel connections, use the same polarity, and for series connections, use different polarities.
5. Match impedance: If you are using a low impedance connection, ensure that the output impedance of your amplifier matches the total impedance of the speakers. For high impedance connections, connect the speakers in a way that their combined input power (wattage) and amplifier output power are equivalent.
Please note that these instructions are general guidelines, and it is always recommended to consult the user manual or contact the manufacturer for specific instructions related to your amplifier and speaker setup.
Add New Comment