User Manual Q&AAnswer
Jan 08, 2025 - 03:57 AM
To change the default noise cancellation mode on the Minidiva Neckband Bluetooth Hearing Aids, please follow these steps:
1. Power on the hearing aids by pressing the power button. The blue light will blink to indicate that the device is turned on.
2. To enter the Normal Mode, which muffles background noise and transfers amplified sound to the headphones, shortly push the ANC (Active Noise Cancellation) button once. You will hear one beep to confirm the mode change.
3. If you want to switch to the Indoor Mode, which is useful in quiet environments for better hearing conversations and TV, quickly press the ANC button twice. You will hear two beeps (beep, beep) to confirm the mode change.
4. For the Outdoor Mode, which provides a greater sound gathering effect and reduces background noise, quickly press the ANC button three times. You will hear three beeps (beep, beep, beep) to confirm the mode change.
Please note that the Minidiva Neckband Bluetooth Hearing Aids support three different noise cancellation modes: Normal Mode, Indoor Mode, and Outdoor Mode. Each mode has its own benefits depending on the environment you are in. It is important to remember that the noise cancellation modes will not function while the device is connected to Bluetooth. In Bluetooth mode, the hearing aids function as typical Bluetooth headphones.
For further information and instructions, please refer to the Minidiva Neckband Bluetooth Hearing Aids user manual.
Add New Comment