How do I install the MARD AUDIO DAN-180DL HiFi 2-Wege Einbaulautsprecher in a false ceiling or wall? (MARD AUDIO DAN-180DL In-Ceiling Speakers Instruction Guide)

Answer

manuals.plus

Jan 08, 2025 - 03:01 AM


To install the MARD AUDIO DAN-180DL HiFi 2-Wege Einbaulautsprecher in a false ceiling or wall, follow these steps:

1. Begin by preparing the installation location. Ensure that the ceiling or wall is suitable for installation and has enough space for the speaker's dimensions (180mm cutout and 205mm outside dimensions).

2. Use the provided template to mark the cutout area on the ceiling or wall. Make sure to align it properly.

3. Carefully cut out the marked area using appropriate tools, following the template's guidelines.

4. Once the cutout is complete, insert the DAN-180DL speaker into the hole. Ensure that it fits securely and aligns properly.

5. Connect the speaker wires from your audio amplifier to the binding posts on the back of the DAN-180DL speaker. Make sure to match the positive and negative terminals correctly.

6. After connecting the wires, gently push the speaker into the cutout until it is flush with the ceiling or wall surface.

7. If desired, you can paint the magnetic grid of the speaker to match the surrounding decor. Ensure that you use appropriate paint and follow the painting instructions in the manual.

8. Finally, test the speaker by playing audio through your amplifier. Adjust the positioning and angle of the swiveling tweeter, if necessary, to optimize the sound quality.

Please refer to the MARD AUDIO DAN-180DL HiFi 2-Wege Einbaulautsprecher Instruction Guide for more detailed installation instructions and safety precautions.