User Manual Q&AAnswer
Jan 08, 2025 - 02:58 AM
To connect an amplifier to the Pyle PDIWCS56 ceiling speakers, follow these steps:
1. Ensure that the amplifier is unplugged and turn off the breaker.
2. Drill a hole in the wall for the speaker wires.
3. Install the wiring by running the wires from the amplifier location to the speaker location.
4. Strip the ends of the speaker wires to expose the bare wire.
5. Connect the positive (+) terminal of the speaker wire to the positive (+) terminal of the ceiling speaker.
6. Connect the negative (-) terminal of the speaker wire to the negative (-) terminal of the ceiling speaker.
7. Repeat steps 5 and 6 for the remaining speakers.
8. Connect the other end of the speaker wires to the corresponding terminals on the amplifier.
9. Once all the connections are made, turn on the breaker to supply power to the amplifier.
10. Test the system by playing audio through the amplifier.
Please refer to the Pyle PDIWCS56 Ceiling Wall Mount Enclosed Speaker User Guide for more detailed instructions and diagrams on connecting the speakers to the amplifier.
Add New Comment