User Manual Q&AAnswer
Jan 08, 2025 - 02:17 AM
To use the Zinnor 4525 Pen Device Acupuncture, follow these steps:
1. Start by selecting the appropriate probe for your desired treatment. The device comes with three probes: one for the face, one for the body, and a metal probe for activating the body's healing ability.
2. Connect the chosen probe to the device using the provided cable.
3. Ensure that the device is charged by using the included charger. The device has a rechargeable lithium battery.
4. Turn on the device by using the ON/OFF intensity control. The output intensity can be adjusted from 0 to 10mA.
5. To locate the acupoint, use the sensitivity adjust control. The LCD digital display will show a number that increases as the skin's electric resistance decreases. The maximum number indicates the discovery of an acupuncture point.
6. Once the acupoint is located, place the probe on the point and press the button to stimulate the area with electric acupuncture treatment. The impulse frequency can be adjusted from 6 to 23Hz.
7. Treatment sessions should last for one to two times daily, with each session lasting three to five minutes at a single acupoint or location. In some cases, more time may be required.
Important Note: Before using the Zinnor 4525 Pen Device Acupuncture, please read the user manual in English provided in the box for detailed instructions and safety precautions.
Please consult the user manual for further information and guidance on using the Zinnor 4525 Pen Device Acupuncture.
Add New Comment