User Manual Q&AAnswer
Jan 08, 2025 - 01:46 AM
To connect Donner M20-4 passive speakers to your stereo receiver, follow these steps:
1. Ensure that your stereo receiver is turned off and unplugged from the power source.
2. Locate the speaker wire terminals on the back of your stereo receiver. These terminals are usually labeled as "Speaker Out" or "Speaker Output."
3. Take the speaker wire included with the Donner M20-4 speakers and strip off a small portion of insulation from each end of the wire.
4. Insert one end of the speaker wire into the positive (+) terminal of the right channel speaker output on your stereo receiver. The positive terminal is usually color-coded or labeled as "+."
5. Insert the other end of the speaker wire into the corresponding positive (+) terminal on the back of the right Donner M20-4 speaker.
6. Repeat steps 4 and 5 for the negative (-) terminals. Connect the negative (-) terminal of the right channel speaker output on your stereo receiver to the negative (-) terminal of the right Donner M20-4 speaker.
7. Repeat steps 4-6 for the left channel speaker output and the left Donner M20-4 speaker.
8. Once all the connections are made, double-check that the speaker wire is securely inserted into the terminals and that there are no loose strands of wire.
9. Plug your stereo receiver back into the power source and turn it on.
10. Test the audio output by playing music or a movie through your stereo receiver. Adjust the volume and balance settings as desired.
Please refer to the Donner M20-4 user manual for any additional information or troubleshooting steps.
Add New Comment