User Manual Q&AAnswer
Jan 08, 2025 - 01:45 AM
To connect the Lepy LP-2020A Hi-Fi Digital Amplifier to your audio source, follow these steps:
1. Ensure that the amplifier is powered off and disconnected from the power supply.
2. Identify the audio output ports on your audio source device (e.g., smartphone, MP3 player, computer).
3. Use an appropriate audio cable (e.g., RCA cable, 3.5mm AUX cable) to connect the audio output ports of your audio source device to the input ports of the Lepy LP-2020A amplifier. The LP-2020A amplifier has multiple audio inputs, so choose the input that suits your audio source.
4. Make sure the connections are secure and properly inserted into the respective ports.
5. Connect your speakers to the speaker output terminals on the back of the amplifier. Ensure that the speaker impedance matches the recommended range of 4-80 ohms.
6. Once all the connections are made, connect the power supply to the amplifier and then plug it into a power outlet.
7. Turn on the amplifier and your audio source device.
8. Adjust the volume and tone settings on the amplifier according to your preference.
Please refer to the Lepy LP-2020A Hi-Fi Digital Amplifier Operational Manual for more detailed instructions and illustrations on connecting the amplifier to your audio source.
Add New Comment