User Manual Q&AAnswer
Jan 08, 2025 - 01:27 AM
To load paper into the Fujifilm DX100 Inkjet Photo Printer, follow these steps:
1. Open the paper tray cover located on the front of the printer.
2. Pull out the paper tray extension until it stops.
3. Adjust the paper guides to match the width of the paper you are using.
4. Take a stack of paper and fan it to prevent sticking. Make sure the leading edge is aligned and straight.
5. Place the paper stack into the paper tray with the printable side facing down.
6. Push the paper tray extension back in until it is fully inserted.
7. Close the paper tray cover.
For more detailed instructions and illustrations, please refer to the "Loading Paper" section of the Fujifilm DX100 Inkjet Photo Printer User Manual, which can be accessed using the link provided.
Add New Comment