User Manual Q&AAnswer
Jan 08, 2025 - 01:18 AM
To connect the Pyle PDICBT552RD Pair Bluetooth Flush Mount speakers to your Bluetooth device, please follow these steps:
1. Make sure the Bluetooth speakers are powered on and in pairing mode. You can do this by pressing and holding the Bluetooth button on the Bluetooth controller (Picture C) until the LED indicator starts flashing.
2. On your Bluetooth device (e.g., smartphone, tablet, laptop), go to the Bluetooth settings menu.
3. Enable Bluetooth on your device if it is not already enabled.
4. In the Bluetooth settings menu, search for available devices. The Pyle PDICBT552RD speakers should appear as "Pyle" in the list of available devices.
5. Select the "Pyle" device from the list to initiate the pairing process.
6. If prompted, enter the Bluetooth network password, which is '0000'.
7. Once the pairing is successful, the LED indicator on the Bluetooth controller (Picture C) will stop flashing and remain solid.
8. You can now play audio from your Bluetooth device, and it will be wirelessly transmitted to the Pyle PDICBT552RD Pair Bluetooth Flush Mount speakers.
Please refer to the Bluetooth Connection Diagram in the user guide for a visual representation of the connections.
Note: The Bluetooth wireless range is approximately 30 feet or more, so make sure your Bluetooth device is within range of the speakers for a stable connection.
For further information or troubleshooting, please consult the user guide provided with your Pyle PDICBT552RD Pair Bluetooth Flush Mount speakers.
Add New Comment