User Manual Q&AAnswer
Jan 08, 2025 - 12:49 AM
To connect and set up the , follow these steps:
1. Ensure that your display device (TV, projector, etc.) has an available HDMI input port.
2. Connect the HDMI cable from the HDMI output port of the InFocus INLIGHTCAST Wireless Display Module to the HDMI input port of your display device.
3. Connect the power adapter to the InFocus INLIGHTCAST Wireless Display Module and plug it into a power outlet.
4. Turn on your display device and select the appropriate HDMI input source.
5. On your source device (laptop, smartphone, etc.), enable Wi-Fi and connect to the network named "InFocusCast" or "InFocusCast_xxxx" (xxxx represents the last four digits of the module's MAC address).
6. Open a web browser on your source device and enter the IP address "http://192.168.49.1" or "http://cast.infocus.com" to access the module's web interface.
7. Follow the on-screen instructions to complete the initial setup process, including connecting the module to your Wi-Fi network.
8. Once the setup is complete, you can start wirelessly displaying content from your source device to the connected display.
For more detailed instructions and troubleshooting tips, please refer to the InFocus INLIGHTCAST Wireless Display Module User Guide provided in the link above.
Add New Comment