User Manual Q&AAnswer
Jan 08, 2025 - 12:25 AM
To set the temperature on the Bio Green PAL 2.0/USDT Palma Greenhouse Heater, follow these steps:
1. Make sure the heater is plugged into the thermostat (Thermo 2) if you are using it, or directly into a mains socket if you are not using the thermostat.
2. Set the mode selector switch on the Palma heater to the desired operating mode. There are three possible modes to choose from.
3. If you are using the Thermo 2 thermostat, set the desired room temperature on the thermostat according to the instructions provided with the Thermo 2.
4. If you are not using the Thermo 2 thermostat, set the heater thermostat to the maximum setting.
5. The heater will now maintain the set temperature by turning on and off as needed. If the room temperature falls below the set level, the heater will turn on again to maintain the desired temperature.
Please note that the temperature scale is not printed on the thermostat switch, so you may need to adjust the setting based on the actual temperature inside your greenhouse.
For more detailed instructions and safety information, please refer to the Bio Green PAL 2.0/USDT Palma Greenhouse Heater Instruction Guide.
Add New Comment