User Manual Q&AAnswer
Jan 08, 2025 - 12:16 AM
To adjust the thermostat on the Amazon Basics DQ1927-Y 1500W Ceramic Personal Heater, follow these steps:
1. Turn the thermostat control clockwise to the highest position to start the heater.
2. Allow the heater to operate and warm up the room.
3. When the desired temperature/comfort level is reached, lower the temperature setting by turning the Thermostat Control counter-clockwise until the heater stops operating.
4. The thermostat will automatically maintain the pre-set temperature level by turning the heater ON and OFF.
Note: It is normal for the heater to cycle on and off to maintain the preset temperature. If you want to prevent the heater from doing so, increase the temperature with the thermostat xxxx .
Please refer to the user manual for more detailed instructions and safety information.
Add New Comment