User Manual Q&AAnswer
Jan 08, 2025 - 12:06 AM
There could be several reasons why your Optoma UHD35 projector is not showing pictures. Here are some troubleshooting steps you can try:
1. Check cable connections: Ensure that all the cables, including the HDMI cable, are securely connected to both the projector and the video source. Try using a different HDMI cable to rule out any cable issues.
2. Power cycle the projector: Turn off the projector and unplug its power cable from the outlet. Wait for a few minutes, then reconnect the power cable and turn on the projector again. This can sometimes resolve temporary glitches.
3. Check input source: Make sure that the correct input source is selected on the projector. Use the remote or the projector's control panel to switch to the appropriate input source (e.g., HDMI).
4. Wake the projector from standby or sleep mode: Press the projector's power button to wake it from standby or sleep mode. Sometimes, projectors go into power-saving modes and need to be manually awakened.
5. Adjust display settings: If you are using a computer or a gaming console as the video source, ensure that the display settings are configured correctly. Check the resolution and refresh rate settings on your device to match the projector's supported specifications.
If none of these steps resolve the issue, it is recommended to consult the Optoma UHD35 True 4K UHD Gaming Projector instruction manual or contact Optoma customer support for further assistance.
Add New Comment