How do I set up and calibrate the Tanita HD362F FitScan Digital Weight Scale? (Tanita HD362F FitScan Digital Weight Scale User Manual)

Answer

manuals.plus

Jan 07, 2025 - 11:46 PM

To set up and calibrate the Tanita HD362F FitScan Digital Weight Scale, please follow the instructions provided in the user manual. Here is a step-by-step guide:

1. Place the scale on a hard and flat surface. Avoid using it on carpet or uneven surfaces as it may affect the accuracy of the measurements.

2. Insert the batteries into the battery compartment located on the back of the scale. Make sure to follow the correct polarity (+/-) indicated inside the compartment.

3. Turn on the scale by pressing the power button located on the front of the scale. The display will show "0.0" or "8888" before calibration.

4. To calibrate the scale, step onto the scale with bare feet. Make sure to distribute your weight evenly on the scale. The scale will automatically calibrate and display your weight.

5. If the scale does not calibrate or shows an error message, refer to the troubleshooting section in the user manual for possible solutions.

6. Once the scale is calibrated, you can step on it for regular weight measurements. The scale will display your weight in either pounds (lb) or kilograms (kg), depending on the unit you have selected.

7. To change the weight unit, press the unit button located on the front of the scale. The scale can be set to display weight in either pounds (lb) or kilograms (kg).

8. The Tanita HD362F FitScan Digital Weight Scale also offers additional features such as body fat percentage, body water percentage, muscle mass, and more. Refer to the user manual for instructions on how to use these features.

Please note that the above instructions are a general guide. For more detailed information and specific instructions, it is recommended to refer to the user manual provided with the product.