User Manual Q&AAnswer
Jan 07, 2025 - 11:40 PM
To calibrate the A&D Weighing FG-60KAL Platform Scales, please follow the steps outlined in the user manual. Here is a step-by-step guide:
1. Ensure that the scale is placed on a stable and level surface.
2. Press the "ON/OFF" button to turn on the scale.
3. Wait for the scale to stabilize and display "0.0" on the screen.
4. Press and hold the "MODE" button for approximately 3 seconds until the calibration mode is activated.
5. The display will show "CAL" followed by a calibration weight value.
6. Place the calibration weight on the scale's platform. The weight value should match the displayed value.
7. Press the "MODE" button to confirm the calibration weight. The display will show "CAL" followed by the next calibration weight value.
8. Repeat steps 6 and 7 for all the required calibration weights.
9. After the last calibration weight is confirmed, the display will show "END" to indicate the completion of the calibration process.
10. Press the "ON/OFF" button to turn off the scale.
Note: It is important to use the appropriate calibration weights specified in the user manual for accurate calibration. The manual provides further details on the calibration process, including the required calibration weights and any additional considerations.
For a more comprehensive understanding of the calibration procedure, please refer to the user manual provided in the link: [A&D Weighing FG-60KAL Platform Scales User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment