User Manual Q&AAnswer
Jan 07, 2025 - 11:36 PM
To calibrate the Yamato SPC-2002 Accu-Weigh Scale, follow these steps:
1. Ensure that the scale is placed on a stable and level surface.
2. Press the "ON/OFF" button to turn on the scale.
3. Wait for the scale to stabilize and display "0.0" on the screen.
4. Press and hold the "MODE" button for approximately 3 seconds until the calibration mode is activated. The screen will display "CAL" and the calibration weight value.
5. Place the calibration weight on the scale. The calibration weight value should match the displayed value on the screen.
6. Press the "MODE" button to confirm the calibration. The screen will display "END" to indicate that the calibration is complete.
7. Remove the calibration weight from the scale.
8. Press the "ON/OFF" button to turn off the scale.
Note: It is recommended to perform calibration regularly to ensure accurate weighing results. The calibration weight value should be within the range specified in the user manual.
For more detailed instructions and illustrations, please refer to the Yamato SPC-2002 Accu-Weigh Scale user manual provided.
Add New Comment